Incoloy 901 BAR/Plate / Bolt / Wire / Pipe

Product Detail

Common Trade Names:Incoloy 901, Nimonic alloy 901,UNS N09901,W.Nr. 2.4662

Incocoloy 901 is a nickel-iron-chromium alloy containing titanium and aluminum for precipitation hardening and molybdenum for solid-solution strengthening. The alloy has high yield strength and creep resistance at temperatures to about 1110°F (600°C). A substantial iron content enables the alloy to combine high strength with good forging characteristics. Used in gas turbines for discs and shafts.

Incoloy 901 Chemical Composition
Alloy

%

Ni

Cr

Fe

Mo

B

Co

C

Mn

Si

S

Cu

Al

Ti

P

Pb

901

Min.

40.0

11.0

balance

5.0

0.01 - - - - - - - 2.8 - -

Max.

45.0

14.0

5.6

0.02 1.0 0.1 0.5 0.4 0.03 0.2 0.35 3.1 0.02 0.001
Incoloy 901 Physical Properties
Density
8.14 g/cm³
Melting point
1280-1345 ℃
Incoloy 901 Mechanical Properties at room temperature
Status
Tensile strength 
Rm N/mm²
Yield strength 
Rp
0. 2N/mm²
Elongation 
As %
Solution treatment
1034
689
12

 

Incoloy 901  Standards and Specifications

Bar/Rod Wire   Forging Others
BR HR 55, SAE
AMS 5660, SAE AMS 5661, AECMA PrEN2176,
AECMA PrEN2177, ISO 9723, ISO 9725 
BR HR 55, SAE
AMS 5660, SAE AMS 5661, AECMA PrEN2176,
AECMA PrEN2177, ISO 9723, ISO 9725 
BR HR 55, SAE
AMS 5660, SAE AMS 5661, AECMA PrEN2176,
AECMA PrEN2177, ISO 9723, ISO 9725  
AECMA PrEN2178 

Incoloy 901 Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

Incoloy 901 bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

Incoloy 901 welding wire & Spring wire

Supply in welding wire and spring wire in coil form and cut length.

Incoloy 901 seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

Nimonic 80A, iNCONEL 718, iNCONEL 625, incoloy 800

Incoloy 901 Forging Ring

Forging Ring or gasket,size can be customized with bright surface and precision tolerance

Fasterner & Other Fitting

Incoloy 901 Fasteners

Alloy 901 materials  in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Why Incoloy 901 ?

Under 650℃, the alloy has high yield strength and rupture strength. Under 760℃, it has good oxidation resistance and stable long-term use.
Widely used in the manufacture of aviation and ground gas turbine engines operating below 650C turntable shape parts (turbine disc, compressor disc, journal, etc.), static structure parts, turbine outer ring, fasteners and other parts。

Incoloy 901 Applications and special requirements:

This alloy is widely used in aero-engine in work rotating parts and fasteners of foreian countries and the ground gas turbine until 650 C, a longer service lifeHome, it also has been used on aircraft engine, which is a mature alloy through using test.Alloy farging, if process parameters selection or operation is improper, its performance will show obvious directivity, and may cause sensitive gap. but as long as the process strictly, the phenomenon.won't appear. Expansion coefficient of the alloy is close to heat intensity alloy steel, iron element sizewhich makes it possible to connect two kinds of materials in the face of hot account without special provisions.

 


  • Previous:
  • Next:

  • Write your message here and send it to us