Incoloy800/ 800H/800HT Flange
Incoloy 800/800H/800HT Flange
Flange Material : Incoloy Alloy 800/800H/800HT
Flange Types : According to clients requirments
Delivery Date : 15-30 days
Payment Term : T/T, L/C, Paypal, Ect
Sekoinc Metals Main produce and supply special alloys Flanges, we accept sample order
Incoloy Alloy 800 is a widely used structural material for equipment that must have high strength and resist oxidation, carburizing and other harmful effects of high temperature exposure (for high temperature applications requiring optimal creep and fracture properties, use Incoloy Alloy 800H and 800HT).
The major differences between alloys 800, 800H and 800HT are mechanical properties. The differences stem from the restricted compositions of alloys 800H and 800HT and the high-temperature anneals used for these alloys. In general, alloy 800 has higher mechanical properties at room temperature and during short-time exposure to elevated temperatures, whereas alloys 800H and 800HT have superior creep and rupture strength during extended high temperature exposure.
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti | Al+Ti |
| Incoloy 800 | Min. | 30 | 19 | balance | - | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Max. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| Incoloy 800H | Min. | 30 | 19 | balance | 0.05 | - | - | - | - | 0.15 | 0.15 | 0.3 |
| Max. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 | ||
| Incoloy 800HT | Min. | 30 | 19 | balance | 0.06 | - | - | - | - | 0.25 | 0.25 | 0.85 |
| Max. | 35 | 23 | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 | 1.2 |
| Density (g/cm3) |
Melting point (℃ ) |
Elastic modulus ( GPa) |
Thermal conductivity (λ/(W(m•℃)) |
Thermal expansion coefficient ( 24 -100°C)(m/m °C) |
Operating temperature (°C ) |
| 7.94 | 1357-1385 | 196 | 1.28 | 14.2 | -200 ~ +1,100 |
| Alloy | Form | Condition | Ultimate Tensile strength ksi (MPa) |
Yield strengthat 0.2% offset ksi (MPa) |
Elongation in 2″or 4D, percent |
| 800 | Sheet, Plate | Annealed | 85 (586) | 40 (276) | 43 |
| 800 | Sheet, Plate Strip, Bar |
Annealed | 75 (520)* | 30 (205)* | 30* |
| 800H | Sheet, Plate | SHT | 80 (552) | 35 (241) | 47 |
| 800H | Sheet, Plate Strip, Bar |
SHT | 65 (450)* | 25 (170)* | 30* |
• Flange Types :
→ Welding plate flange（PL） → Slip-on Neck Flange (SO)
→ Welding neck flange (WN) → Integral flange (IF)
→ Socket welding flange (SW) → Threaded flange (Th)
→ Lapped joint flange (LJF) → Blind flange (BL(s)
♦ Main Flange Materials We Produce
• Stainless Steel : ASTM A182
Grade F304 / F304L, F316/ F316L,F310, F309, F317L,F321,F904L,F347
Duplex Stainless Steel: Grade F44 / F45 / F51 / F53 / F55 / F61 / F60
• Nickel Alloys : ASTM B472, ASTM B564, ASTM B160
Monel 400, Nickel 200, Incoloy 825, Incoly 926, Inconel 601, Inconel 718
Hastelloy C276, Alloy 31, Alloy 20, Inconel 625, Inconel 600
• Titanium Alloys : Gr1 / Gr2 / Gr3 /Gr4 / GR5/ Gr7 /Gr9 /Gr11 / Gr12
♦ Standards:
ANSI B16.5 Class150、300、600、900、1500（WN,SO,BL,TH,LJ,SW）
DIN2573,2572,2631,2576,2632,2633,2543,2634,2545（PL,SO,WN,BL,TH）
Incoloy 800/800H/800HT Available Products in Sekonic Metals
Incoloy 800/800H/800HT Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Incoloy 800/800H/800HT Wire
Supply in welding wire and spring wire in coil form and cut length.
Incoloy 800/800H/800HT Flange
Standards size and customized dimension can be produced by us with precision tolerance
Incoloy800/800H/800HT sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Incoloy 800/800H/800HT seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
Incoloy 800/800H/800HT strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Incoloy 800/800H/800HT Fasteners
Alloy materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why Incoloy 800/800H/800HT ?
• Excellent corrosion resistance in the water media of the extremely high temperature of 500℃.
• Good stress corrosion resistance
• Good machining
• High creep strength
• Very good resistance to oxidation
• Good resistance to combustion gases
• Very good resistance to carburization
• Good resistance to nitrogen absorption
• Good structural stability at high temperatures
• Good weldability
Incoloy 800/800H/800HT Application field：
• Ethylene furnace quench boilers • Hydrocarbon cracking
• Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
• Industrial furnaces • Heat-treating equipment
• Chemical and petrochemical processing • Heat exchangers
• Super-heater and re-heaters in power plants • Pressure vessels
