Inconel 725 BAR/ ROD/ Plate/Gasket/Tubing hanger

Product Detail

Common Trade Names:   Inconel 725, Alloy 725, Nickel 725,UNS N07725

 Alloy 725 is a precipitation hardenable, nickel-base alloy that offers exceptional resistance to stress corrosion cracking and general pitting and crevice corrosion in the age hardened condition. With corrosion resistance similar to 625 and superior to that of 718, 725 is considered for applications where severely corrosive environments are a concern. A yield strength (0.2% offset) above 120 ksi (827 MPa) can be obtained by aging without prior warm or cold working. The precipitation hardening capability is particularly important in applications where large-section size or intricate shape precludes warm working.

Inconel 725 Chemical Composition
Alloy

%

Ni

Cr

Fe

Mo

P

Nb

C

Mn

Si

S

Al

Ti

725

Min.

 55.0

 19.0

balance

 7.0

 2.75  - -  1.0

Max.

59.0 

 22.5

9.5 

 0.015  4.0  0.03  0.35  0.2  0.01  0.35

 1.7

 

Inconel 725 Physical Properties
Density
8.3 g/cm³
Melting point
1271-1343 ℃
Inconel 725 Typical Mechanical Properties

Status

0.2% Yield Strength

Ultimate Tensile Strength

% Elongation 

in 4D

%

Reduction of Area

Brinell hardness
HB
  HRC

ksi

MPa

ksi

MPa

Ft.-lbs

J

Solution Annealed

47

324 117 806 70

72

 -

 - 28

Solution Annealed + Aged

134

923

186

1282

33

51

87

118 35

 

Inconel 725  Standards and Specifications

Bar/Rod Wire
ASTM B 805, ASME Code Case 2217,SMC specification HA91, ASME Code Case 2217 
 ASTM B 805, ASME Code Case 2217

Inconel 725 Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

Inconel 725 bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

Sheet & Plate

Inconel 725 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.

nickel-tube

Inconel 725 seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

Nimonic 80A, iNCONEL 718, iNCONEL 625, incoloy 800

Inconel 725 Forging Ring

Forging Ring or gasket,size can be customized with bright surface and precision tolerance

Oil Tubing Hanger

Inconel 725 Tubing Hanger

Can be produced according to clients drawing or smaples with precision tolerance.

Fasterner & Other Fitting

Inconel 725 Fasteners

Alloy 725 materials  in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Inconel 725 Corrosion resistance

• lron-nickel-chromium-molvbdenum-niobium based alloy, good resistance to a wide range of corrosive chemicals. Highly resistant to corrosion, pitting, and stress cracking in the environment containing carbon dioxide, chlorine and hydrogen sulfide.Outstanding corrosion resistance for the environments containing acidic chemicals.Good corrosion resistance for brine and seawater.
• Good corrosion resistance at high temperature applications. such as oil and gas production. where the alloy has good resistance to H2S corrosion.

Inconel 725 Applications:

 Bearings and other parts for the equipment which requires high resistance to acidic chemicals or environments. The parts or equioment used in ocean conditions


  • Previous:
  • Next:

  • Write your message here and send it to us